Vertical combustion tester

  Used for testing the burning performance of textiles. The stainless steel test box is equipped with a glass observation window, which automatically measures the time from the beginning of sample combustion to 0.1s. Ignition time can be set freely. At present, the 45-degree combustion tester is widely used in the textile and material industry, and the frequency is also very high. Therefore, in the long-term use process, the wear and consumption is inevitable, so regular maintenance is necessary. ASTM D6413

The vertical flame tester is suitable for measuring flame retardant performance of clothing fabric, decorative fabric, tent fabric, safety protection net and so on. It can be used by printing and dyeing industry, textile inspection department and scientific research institute. The MOTIS vertical combustion tester (automatic), designed according to CA TB117 standards, is designed to test the flame retardation properties of upholstered furniture fabrics and fillings with different sample holders. It can also meet the CPAI 84 tent combustion test requirements of the international trade and textile association and the standard flame retardation test required by FAA.

provided

It has three burners and a variable size combustion chamber

Instrument characteristics

Stainless steel case with transparent tube side window

Bunsen lamp flame, in accordance with ASTM D5025 standard

Ignition time can be set freely

The timer is accurate to 0.1 second

Standard stainless steel sample holder is available

Through the replacement of different sample clips, it can meet the requirements of different standards

Automatic moving Bunsen lamp, no time difference during ignition and extinction

1. Ignition of resistance wire.

2, with three kinds of burners and variable size combustion box can be selected according to different tests.

3. Automatic timing positioning of burner.

4, ignition time 0 ~ 99.99 seconds arbitrary Settings, afterburning time, flame retardant time are automatically recorded, digital display.

5. Flame height can be adjusted and flame temperature measuring device can be equipped.

6. "push-pull" sample frame fixing device

Technical indicators

1. Sample size: textile: 300mm×80mm

2. Power consumed by the burner's moving motor: 10W

3, igniter timing: 0 ~ 99.99 seconds arbitrary Settings, (standard 12 seconds)

4. Afterburning time and flame retardant time timer: 0 ~ 99.99 seconds, accuracy: ±0.01 seconds

5. Flame height measuring device: scale height is 40mm

6, use gas: propane or butane or petroleum liquefied gas

7. Power supply:

Applicable standards

GB/T 5455-1997 vertical method for testing combustion properties of textiles

GB5725-2009 safety net

GB/T 13489-2008 determination of burning properties of rubber-coated fabrics

ISO 1210-1996 "determination of combustion properties of vertical samples in contact with small ignition sources of plastics"

Flame retardant protective clothing part I flame retardant clothing

GB23864-2009

GB/T 5455-1997

Meet the standards:

CA TB 117 Section A & B

CPAI CAPI 84 (Wall & Top)

FAA FAR Part 25 Appendix F PartI

Boeing BSS 7230

Airbus AITM 2.0002

ASTM D6413, American society for materials

1 scope

This standard provides the test method for measuring the resistance of various kinds of flame resistant textiles, which is used for measuring the afterburning, smoldering and carbonization of textiles

To the.

This standard is applicable to the determination of flame retardancy of woven fabrics, knitted fabrics, coated products and laminated products.

2 reference standard

The following standards contain provisions which, by reference in this standard, constitute provisions of this standard. At the time of publication, all versions are shown

To effectively. All standards are subject to revision. Parties using this standard should explore the possibility of using version xx of the following standards.

Standard atmosphere for moisture control and testing of textiles