Condom leak tester

Main use: Water leakage method suitable for condom pinhole test.

Working conditions: the water temperature is 10~40℃.

technical parameter:

Exile dimension: length about 1100³ width about 520³ height about 800mm (whichever).

Detection performance: meet the water leakage test of condom pinhole test.

Meet the experimental requirements of the test method: GB / T 7544-2019 / ISO 4074:2015.

Control requirements: automatic control of water intake, 8 fixed heads, each head water intake of 300ml~600ml (adjustable).

configure:

Condom water leakage tester (including test bracket, sink, storage tank, fixing device, solenoid valve fixing device, when

Room controller): 1 set

Time controller: 0.01-99.99 seconds (minutes or hours)

Water leakage test:

principle:

Fill the condom with a specified volume of water and check for the obvious leakage of the hanging condom through the outer surface.When confirming there is no any leakage, roll the condom on coloured absorbent paper while checking for signs of leakage.

Instrument fixtures.Suitable for fixing condoms at the open end to hang freely.Fill the condom in suspension.

graph M.1 For a suitable fixdevice, a condom can also be secured using a rubber ring.

Non-colored water-absorbing paper.

Rolling device (optional) composed of smooth transparent test plates.It can be placed in parallel at mm above the absorbent paper (30 ± 5), and can roll condoms back and forth in a horizontal direction.

If rolling, rotate the condom for at least a complete week.

Cping (optional) suitable to grasp the opening end of the reversed condom and to prevent leakage without damage to the portion rolled on the absorbent paper.Such as spring paper clip