Introduction of needle flame tester

Needle flame tester is suitable for testing the flame retardant performance of electronic components, electrical components, mechanical components, injection molding parts and other electrical products. This machine is used to simulate the small flame generated inside the product under the condition of failure.

The basic information

standard

Design criteria

GB5169.5-2008, GB4706.1-2005

IEC60695

IEC60695-2-2 (2004).

The component of product

Needle flame tester is composed of needle flame burner, workroom and temperature measuring device.

The machine conforms to iec60695-2-2 (2004), gb5169.5-2008, GB4706.1 and other test standards.

Product parameters

● working voltage :AC220V, 50Hz;

● flame time: adjustable (0~ 999.9s);

● holding time :0~ 999.9s, automatic recording, arbitrary suspension;

● flame height :12±1mm adjustable;

Low flame temperature measurement: from 100 ℃ to + / - 5 ℃ up to 700 ℃ + 3 ℃ to 23.5 S + 1 S, temperature display: 0-1000 ℃ plus or minus 0.5 ℃;

● air source type: butane (user-supplied);

● flame Angle :0~45° adjustable;

When the needle height: more than 35 mm (ф ф 0.5 inside diameter of the diameter 0.9);

● adjustable air volume (flowmeter);

● external dimension :1100X1150X550mm(the internal volume is larger than 0.5 cubic, 0.75 cubic and 1 cubic can be customized.)

● thermocouple: phi 0.5 armoured ni-cr/ni-al wire,K index, imported from the United Kingdom, ground insulation;

● with a plate, five pieces of silk paper, a pine board;

Origin or brand of main accessories:

1. Relay: omron.

2. Digital instrumentation: displays with autonics, South Korea.

Circuit breaker: schneider

4. Button, switch and indicator light: Shanghai.

5. Box body: made of 1.2 thick 304 stainless steel plate, the surface is painted.