This RCA machine is completely adjusted according to the technical standard of American Norman Tool company, and the paper tape RCA paper tape friction testing machine has reached the consistent technical parameters through comparison testing.

This machine is suitable for the abrasion resistance test of mobile phone P.D.A. laptop computer and all kinds of surface coating products. After rolling the uncoated paper or tape and the sample, it can determine the abrasion effect under a certain number of turns.

Main features of paper tape wear testing machine:

RCA wear-resisting instrument is used to evaluate shouji, automobile, instrument, plastic surface electroplating, baking paint, silk-screen printing, pad printing and other surface coating wear resistance. Use RCA designed

Use paper tape applied to the surface of the product with a fixed weight (55g, 175g, 275g). Fixed diameter roller and constant speed motor with specific counter.

The wear-resisting performance of the product is determined by the wear-resisting times that the product can bear. It is widely used for shouji surface coating performance test.

Use and principle of paper tape wear-resisting tester:

R.C.A paper tape abrasion resistance tester is suitable for abrasion resistance test of various surface coating (electroplating, baking paint, silk-screen printing, etc.) samples, rolling uncoated paper or tape and samples

To determine the effect of wear after friction with a certain amount of revolution.

Paper tape wear testing machine according to the standards:

ASTM F2357-04

Directions for use

1. The instrument must be placed on a stable table before use.

2. Do not move the machine during use;

3. Choose the corresponding power voltage, not too high, to avoid burning out the device;

4. In case of any abnormality of the instrument, please timely deal with it;

The machine must be well ventilated when it is working.

6. The mechanical parts of the key shall be lubricated timely due to the heavy operating load;

7. Clean and keep the machine clean after each test;

8. The control box should be wiped with dry cloth, not wet cloth.

Usage:

1. The abrasion resistance of uncoated paper or tape will be subject to a certain number of turns.

2. Reduce the load of 55g or 175g for soft materials

3. Two kinds of sample fixing methods are available

4, with a hand-held magnifying glass to view

5. Counter: LED display, 0-99,999,999(adjustable times)

Standard equipment: a set of tools, a magnifying glass, test load :55g,175g each one, general use type fixer, o-ring three