The inge connection firmness tester

meet a criterion:

The tester is designed and manufactured based on the test method of fracture force and firmness as in YY0321-2017.

Instrumentation features:

Use 7-inch PLC colorful LCD display screen, Chinese menu display;

Using digital closed-loop control, AD acquisition speed is 500KHz, internal code 500,000;

High-precision clock chip, power-off and storage;

The PLC control allows for the dynamic display of the load force value;

Overload alarm and shutdown protection;

Nominal specification, testing, upward, down, time, calibration;

Can communicate with the upper microcomputer, to facilitate the experimental data processing;

The keyboard controls the menu on the LCD screen, prints the test data airborne, and displays the tension in real time.

technical parameter:

1. Pull force test range: 0~80N, error not more than ± 1%, resolution 0.01N.

2. Time setting: 1-999S, the error is not greater than ± 0.5S.

3. Speed setting: 50mm / min~500mm / min error is not more than ± 5%

4. Printing method: you can print 8 times, 10 times test data or 13 times test data and average puncture force and deviation value.

To test the catheter fracture force of the anesthesia package, the connection firmness of the catheter and catheter joint, the needle holder and the needle tube, and the lining core and the liner holder.Use 7-inch (320 * 240) LCD display, Chinese menu display.Using digital closed-loop control, AD acquisition speed is 500KHz, internal code 1 million; high precision clock chip, power storage; PLC control dynamic display load force value; overload alarm shutdown protection; nominal specification, test, up, down, time and calibration.It can communicate with upper computer to facilitate experimental data processing; the keyboard controls the menu on LCD to print the test data and display the tension in real time.

The fracture force and connection firmness tester is designed and manufactured according to the test method of the fracture force and firmness in the YY0321 standard. The technical performance and indicators are fully in line with the relevant national pharmaceutical industry standards, and they are specially used for the test of infusion device and injection needle.

The fracture force and connection firmness tester consists of intelligent controller, force measuring mechanism, ranging mechanism, printer and other parts.The intelligent controller is composed of CPU, motherboard, LCD screen, keyboard, power supply and other parts.The screen displays in all Chinese window, with the keyboard control cursor for options, operation, setting, you can follow the prompts without training.

technical parameter:

Pull force test range: 0~100N, error not greater than ± 0.1N, resolution 0.01N.

Test time: 1-999S, with error not greater than ± 0.5S.

Test speed: the fracture force is 500mm / min, the connection firmness is 10mm / min, and the error is not more than ± 2%.

Printing method: each time can print 8 times, 10 times of test data or 13 times of test data and the average puncture force and deviation value.