The automobile interior material drop characteristics detector is designed to determine the melting characteristics of the material according to the test specified in appendix 7 of ECE R118. The equipment is integrated with mechanical and electrical control. The outer box cold plate is treated with orange paint, an American equipment technology.

CSI-T115 automobile interior material drop characteristics detector is to place the sample on the bracket, the distance between the sample on the bracket and the radiant surface is 30 mm. The container includes cotton wool placed 300 mm below the bracket mesh; Put the electric heater to the place where the sample cannot be radiated nearby, turn on the switch, and put it back to the position above the sample to start the timing. If the material melts and deforms, keep the electric heater at a distance of 30mm; During the first 5 minutes of the test, if the material begins to burn, push the electric heater aside for 3 seconds and return to the original place after the flame is extinguished. Repeat the same operation, and finally see whether the droplet falls burning, or whether it ignites the wool;

Technical parameters of appendix 7:

Stainless steel ring with diameter of 118 mm in the sample support, 0.70 mm in the sample, and 2.10 mm in the sample mesh

The sample size is 70×70(mm) and the thickness is not more than 13mm

Residue container Φ inside diameter of 118 mm, 12 mm deep

Radiation heat source power is 500W

Radiation heat radiating surface Φ diameter of 100 mm + / - 5 mm transparent glass

The distance of the residue container from the sample rack is 300mm;

The upper surface of the sample is 30mm away from the surface of the radiation source

The heat flux meter has a range of 10W/cm2

Oad width 1120 mm x 580 mm x 1350 mm high, vent Φ 100 mm;

Working power C220V, 50Hz, ≤1000W

Textile color fastness, scraping, air permeability, abrasion, burning, sweat stains, physical properties, water repellency, waterproof, leather, and other test standards promotion, including test instruments, test consumables, and professional test standards, test method manual. Main business products include: color and color evaluation test instrument, microscopic and legal inspection, mattress, carpet, toy tester testing instruments, humidity, soil temperature and humidity measurement & control system accessories, textile and clothing, non-woven geotextile and tester, gas permeability tester, one-way wear-resisting, leather and shoe material tester, filtering material thickness gauge, transportation tester, high weather resistance and aging tester, accelerated aging test system, oven, environmental equipment, light industry and packaging materials tester, electronic measuring instrument, optical spectra and other tester.